flasher orientation on 69 factory ac car - NCRS Discussion Boards

flasher orientation on 69 factory ac car

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary H.
    Expired
    • June 8, 2008
    • 308

    flasher orientation on 69 factory ac car

    Does anyone know which way the flasher on passenger side under dash mounts? I don't seem to have any slack in wiring harness so can't get the flasher into the mount. I also have factory ac, so the duct might be a little different.
    20140617_091745.jpg
  • Terry M.
    Beyond Control Poster
    • September 30, 1980
    • 15573

    #2
    Re: flasher orientation on 69 factory ac car

    Originally posted by Gary Haftel (49128)
    Does anyone know which way the flasher on passenger side under dash mounts? I don't seem to have any slack in wiring harness so can't get the flasher into the mount. I also have factory ac, so the duct might be a little different.
    [ATTACH=CONFIG]53323[/ATTACH]
    I see most, but not all, early C3 Corvettes with C-60 have the flasher up where the sun don't shine. At least that was what we found back when we were researching the date codes on the flashers. I think the AC duct prevents the flasher wires reaching to the clamp at the lower edge of the passenger side dash panel.
    Terry

    Comment

    • Reba W.
      Very Frequent User
      • June 30, 1985
      • 932

      #3
      Re: flasher orientation on 69 factory ac car

      I have seen lots below the duct but not in the clip. My 1972 is the same way as yours, Gary.

      Comment

      • Gary H.
        Expired
        • June 8, 2008
        • 308

        #4
        Re: flasher orientation on 69 factory ac car

        I can get it to barely snap into the clip if it is facing sideways. How should I address this for judging? Leave it clipped in wrong (I lost a point for this at the regional) or dont clip it in at all?

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"