National Convention 200/300/400 Club Shirt Sizing - NCRS Discussion Boards

National Convention 200/300/400 Club Shirt Sizing

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • David B.
    Former NCRS National Judging Chairman
    • February 28, 1985
    • 219

    National Convention 200/300/400 Club Shirt Sizing

    After registration for this year's national convention closes on June 1st, I will begin preparing the order for the personalized shirts for new members of the 200, 300 and 400 clubs who are registered for the convention. Here is a sizing chart that I received from our vendor (it includes both men and women sizing).

    Please check your size and make sure that you enter the desired shirt size in your profile on the NCRS website. My experience is that the shirt sizes run large, so act accordingly. Your clothing award will be ordered using the size that appears in your profile on June 2nd. If there is no size in your profile, I will do my best to guess your size (probably not the best way to get an award that you worked hard to achieve).

    This sizing chart only applies to 200, 300, and 400 club shirts. Do not use it as a guideline for 200 club jackets and Master Tabulator jackets (my experience is that the jacket sizes run truer).

    If you change the size in your profile, remember to change it back after the convention.

    Finally, I hope to have a set of sample shirts at the MN and CO regional meets for people to try on; this may help your decision.

    Dave

    ShirtSizeChart2014.jpg
  • Ron G.
    Very Frequent User
    • November 30, 1984
    • 865

    #2
    Re: National Convention 200/300/400 Club Shirt Sizing

    Dave,

    I am normally an XL, but based on your advise in regard to the shirts running one full size larger, I am requesting a LARGE. Thank you and I look forward to seeing you and receiving my "400" judging award. Thank you.

    - Ron
    "SOLID LIFTERS MATTER"

    Comment

    • Kevin G.
      Extremely Frequent Poster
      • January 31, 2005
      • 1076

      #3
      Re: National Convention 200/300/400 Club Shirt Sizing

      Mr. Goduti,

      Let me the first to congratulate you on the 400 Level Judging Award! I won't be able to attend the meet but would love to be there to shake your hand! I never took the opportunity to thank you for everything you have taught me, much more than you know! Your participation and knowledge on the judging floor helped me tremendously over the years! I thank you!
      Originally posted by Ron Goduti (8076)
      Dave,

      I am normally an XL, but based on your advise in regard to the shirts running one full size larger, I am requesting a LARGE. Thank you and I look forward to seeing you and receiving my "400" judging award. Thank you.

      - Ron

      Comment

      • Gary C.
        Administrator
        • October 1, 1982
        • 17563

        #4
        Re: National Convention 200/300/400 Club Shirt Sizing

        Ron,

        You'll need to send an email back to the National Judging Chairman with your 400 shirt size.

        Gary
        ....
        NCRS Texas Chapter
        https://www.ncrstexas.org/

        https://www.facebook.com/profile.php?id=61565408483631

        Comment

        • Ron G.
          Very Frequent User
          • November 30, 1984
          • 865

          #5
          Re: National Convention 200/300/400 Club Shirt Sizing

          I will do that. Thanks Gary. Kevin - Thank you for the kind words. It has been a long road. However, its people like you and the quality of cars that you allow people like me to judge that makes us better at what we do. It is always a pleasure so judge your Corvettes. Thank you for providing me with an opportunity to do so.

          - Ron
          "SOLID LIFTERS MATTER"

          Comment

          • Bob B.
            Very Frequent User
            • February 28, 2003
            • 831

            #6
            Re: National Convention 200/300/400 Club Shirt Sizing

            Hello Dave,

            Since you say the shirts run a full size too large, I had best then go with a medium, since I am as slim and trim as my teenage daughter!

            Thanks,

            Bob

            Comment

            • Gary C.
              Administrator
              • October 1, 1982
              • 17563

              #7
              Re: National Convention 200/300/400 Club Shirt Sizing

              Bob, please follow the instructions in the email you received. Gary....

              I'm closing this post - everyone who received an email about an award shirt from the National Judging Chairman - update your shirt size in your profile as requested

              Please check your size and make sure that you enter the desired shirt size in your profile on the NCRS website. My experience is that the shirt sizes run large, so act accordingly. Your clothing award will be ordered using the size that appears in your profile on June 2nd. If there is no size in your profile, I will do my best to guess your size (probably not the best way to get an award that you worked hard to achieve).

              This sizing chart only applies to 200, 300, and 400 club shirts. Do not use it as a guideline for 200 club jackets and Master Tabulator jackets (my experience is that the jacket sizes run truer).

              If you change the size in your profile, remember to change it back after the convention.
              NCRS Texas Chapter
              https://www.ncrstexas.org/

              https://www.facebook.com/profile.php?id=61565408483631

              Comment

              Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"