'64 Vent window frame repair - NCRS Discussion Boards

'64 Vent window frame repair

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Garry E.
    Very Frequent User
    • September 30, 2002
    • 240

    '64 Vent window frame repair

    Can anyone recommend a good shop for the repair of the hinge pin on my convertible vent window frame.....? Many years ago, someone broke into the car via the vent window and bent the small hinge pin in the process.....now the window doesn't close properly in the surrounding frame gasket..... Any suggestions would be appreciated...Garry Eastwood #38705
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: '64 Vent window frame repair

    Originally posted by Garry Eastwood (38705)
    Can anyone recommend a good shop for the repair of the hinge pin on my convertible vent window frame.....? Many years ago, someone broke into the car via the vent window and bent the small hinge pin in the process.....now the window doesn't close properly in the surrounding frame gasket..... Any suggestions would be appreciated...Garry Eastwood #38705
    Garry -

    Paragon has been doing that repair for many years, as has Dick Barron at Virginia Vettes.

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"