steering column firewall gasket 65

[John C.]

hey guys, I pulled the steering column out in order to remove the gauge cluster (fun ) to do bulb replacement and figured while it was out I'd do a radio renovation and also replace the firewall gasket / seal. I didn't see anything removable holding it in place. Is it glued in place ? adhesive backed ? I have a new one on the way from LIC but it is still in transit.
Any help appreciated!
JC

[Bill W.]

Re: steering column firewall gasket 65

John , If your talking about the square gasket it is held on by a bolt on plate on the engine side of the firewall . I dont think it had any sealer .