C1 Washer Nozzle

[Jerry B.]

Does anyone know what thread size is used on the washer nozzle? I have tried SAE as well Metric with no success.

[Mike M.]

Re: C1 Washer Nozzle

they are 5/16 but they are neither coarse or fine threads. rather, originally they were secured to the top surround with a 1/8" thick piece of threaded strap metal bent on about a 30 degree angle. the strap's threads are bastards. i have a couple spares if you'd like them, on the house of course. send me your snail mail address and i'll get them out to you. mike

[Jerry B.]

Re: C1 Washer Nozzle

Thanks Mike, that is very kind

[Mike M.]

Re: C1 Washer Nozzle

did u get them already? if so, the usps must be running in overdrive at 6500 rpm

[Jerry B.]

Re: C1 Washer Nozzle

It is funny what nitro and a can of beer can do.

[Mike E.]

Re: C1 Washer Nozzle

62's used a hex nut rather than the steel strap metal. Same oddball thread.