Brake block/fuel line clamp bolt finishes - NCRS Discussion Boards

Brake block/fuel line clamp bolt finishes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael H.
    Very Frequent User
    • December 1, 2004
    • 118

    Brake block/fuel line clamp bolt finishes

    What is the correct finish on the bolts that secure the fuel line clamps to the right frame rail for a '65? Also, what is the correct finish on the bolt securing the 4-way brake block to the left front frame? The repro bolts I obtained from a leading supplier are zinc plated, but I have seen some suggestion in the Archives here that both bolts should be black phosphate. I can't seem to find any reference to these finishes in the JG. Thanks.
  • Michael H.
    Very Frequent User
    • December 1, 2004
    • 118

    #2
    Re: Brake block/fuel line clamp bolt finishes

    Answered one of my own questions--I now see the reference to the black phosphate recessed hex-head bolts attaching fuel line (on page 151 of JG). How about the brake block bolt finish? Thanks again.

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"