58-61 FI firewall hole - NCRS Discussion Boards

58-61 FI firewall hole

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike E.
    Extremely Frequent Poster
    • February 28, 1975
    • 5137

    58-61 FI firewall hole

    I looked at a red 58 here in town for a friend. It's purportedly FI, but I don't like the firewall hole. AIM says 2.75 wide, with 13/16 radius in each end. Two 13/16 hole saw cuts with a Sawzall connecting them top and bottom, or how was this cut? I'm too used to looking for small dimples on 62 firewalls, I guess!
    thanks
  • William C.
    NCRS Past President
    • May 31, 1975
    • 6037

    #2
    Re: 58-61 FI firewall hole

    Mike Hi horse or 250hp? 250 was gen driven tach...
    Bill Clupper #618

    Comment

    • Mike E.
      Extremely Frequent Poster
      • February 28, 1975
      • 5137

      #3
      Re: 58-61 FI firewall hole

      Bill,
      I should have been more specific. This is high-hp, that's why the concern about the way the larger hole was cut.
      Mike

      Comment

      • William C.
        NCRS Past President
        • May 31, 1975
        • 6037

        #4
        Re: 58-61 FI firewall hole

        How about washer bottle heat shield & such?
        Bill Clupper #618

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"