Exhaust Bezel Screw - NCRS Discussion Boards

Exhaust Bezel Screw

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bob I.
    Very Frequent User
    • November 9, 2006
    • 265

    Exhaust Bezel Screw

    Looking for a description, of the screw (part #4816192) that attach the exhaust bezel to the rear valance. 1970 AIM UPC 1, SHT F 25. Bob
    Last edited by Bob I.; September 29, 2013, 05:23 PM. Reason: add words
  • Scott S.
    Extremely Frequent Poster
    • September 11, 2009
    • 1961

    #2
    Re: Exhaust Bezel Screw

    Originally posted by Bob Imhoff (46494)
    Looking for a description, of the screw (part #4816192) that attach the exhaust bezel to the rear valance. 1970 AIM UPC 1, SHT F 25. Bob
    Bob,

    That part number (GM 4816192) is also listed in the 1964-1967 AIMs. The GM parts books describe the head-type as a cross-recess (i.e., Phillips) "Truss" head (Gr. 8.913 drawing) or possibly a "round head" (in the Gr. 8.977 drawing) with a very small lip (a.k.a. washer-face). It has a pointed tip, which GM refers to as "point A" or "point BA" (Gr. 8.977 drawing). It has a chrome finish, and measures #8-18 x 1/2"

    It is used at four different locations in '67. If you click this link, and scroll down to post #11, you will see some photos of this screw that I posted a couple of years ago: https://www.forums.ncrs.org/showthre...ght=pinch+welt

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"