61/62 balancer pulley bolt id - NCRS Discussion Boards

61/62 balancer pulley bolt id

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe M.
    Very Frequent User
    • February 1, 2005
    • 590

    61/62 balancer pulley bolt id

    5th ed judging guide makes no mention of the headstamp on the pulley to balancer bolts. I have two different bolts, one with an 'E' and others with 'wbr'. Which is correct for a 61 and which correct for a 62? Working on both engines
  • Gene M.
    Extremely Frequent Poster
    • April 1, 1985
    • 4232

    #2
    Re: 61/62 balancer pulley bolt id

    Joe,
    Through out the 60's the RBW marking is most prevalent in that application. But I would not rule out the E. Both are viable suppliers for GM. The E (in my exposure) is more common in the earlier 60's.

    Comment

    • Mike E.
      Extremely Frequent Poster
      • February 28, 1975
      • 5138

      #3
      Re: 61/62 balancer pulley bolt id

      Gene is right on!

      Comment

      • Joe M.
        Very Frequent User
        • February 1, 2005
        • 590

        #4
        Re: 61/62 balancer pulley bolt id

        Odd, don't see my response.try again. Thanks Gene and Mike for the clarification! joe

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"