Need Bracket to Mount underdash A/C Duct on 65 coupe - NCRS Discussion Boards

Need Bracket to Mount underdash A/C Duct on 65 coupe

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • William H.
    Very Frequent User
    • March 1, 1999
    • 249

    Need Bracket to Mount underdash A/C Duct on 65 coupe

    Hello Everyone,
    I have lost or perhaps never had this bracket that bolts between the backside of the Cold air A/C duct and a Stud on the firewall next to the speedometer grommet. Does anyone know where I can purchase one? Does anyone have a drawing of one? Does anyone have one that I could borrow and try to make a copy of?
    I am enclosing the best picture I can find. The picture doesnt look anything like what is in the AIM. THe AIM acts like it is made into the duct but there are two holes on my duct where the bracket would bolt.
    Any help with this would be greatly appreciated. Thanks in advance
    Bill

    ac ductwork.jpg

  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: Need Bracket to Mount underdash A/C Duct on 65 coupe

    Originally posted by William Holder (31950)
    Hello Everyone,
    I have lost or perhaps never had this bracket that bolts between the backside of the Cold air A/C duct and a Stud on the firewall next to the speedometer grommet. Does anyone know where I can purchase one? Does anyone have a drawing of one? Does anyone have one that I could borrow and try to make a copy of?
    I am enclosing the best picture I can find. The picture doesnt look anything like what is in the AIM. THe AIM acts like it is made into the duct but there are two holes on my duct where the bracket would bolt.
    Any help with this would be greatly appreciated. Thanks in advance
    Bill

    [ATTACH=CONFIG]47479[/ATTACH]

    Bill -

    That bracket was riveted to the A/C inside case, and was part of the case assembly as received from Harrison; I doubt if anyone has any of the detail part drawings of in-house Harrison parts. Photo below shows the part - you'll probably have to fabricate it; make it first from a piece of cardboard and transfer the outline to aluminum or steel.


    ACHeaterBox640.jpg

    Comment

    • William H.
      Very Frequent User
      • March 1, 1999
      • 249

      #3
      Re: Need Bracket to Mount underdash A/C Duct on 65 coupe

      Hello John,
      Thanks for the reply!
      I think you are right about the drawing. I was hopefull that somone who has one might make a traceing of one so I could at least get close to the correct shape and size. I guess its not too important because its pretty well hidden from site. I just like to make things as close to correct as I can!
      Thanks
      Again
      Bill

      Comment

      • Kim C.

        #4
        Re: Need Bracket to Mount underdash A/C Duct on 65 coupe

        i sent you an email ? did you get it - contact me at LIC - I have extra brackets.
        Kim

        Comment

        • William H.
          Very Frequent User
          • March 1, 1999
          • 249

          #5
          Re: Need Bracket to Mount underdash A/C Duct on 65 coupe

          Thanks Kim,
          I didnt see it on your website. Can you post or email me a picture of it?
          IF I had known I wouldnt have made this post.

          Comment

          • Tom R.
            Expired
            • December 20, 2010
            • 177

            #6
            Re: Need Bracket to Mount underdash A/C Duct on 65 coupe

            Originally posted by Kim Cohen (3999)
            i sent you an email ? did you get it - contact me at LIC - I have extra brackets.
            Kim
            This kind of thoughtfulness makes this site the best. Hope it works out for him. Great gesture.
            Tom

            Comment

            • William H.
              Very Frequent User
              • March 1, 1999
              • 249

              #7
              Re: Need Bracket to Mount underdash A/C Duct on 65 coupe

              Got the Bracket From Kim@ LIC! Looks great will install soon.
              Thanks to everyone for your help.
              Especially Kim!

              Comment

              Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"