Correct '62 fan clutch & fan fasteners - NCRS Discussion Boards

Correct '62 fan clutch & fan fasteners

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Charlie P.
    Very Frequent User
    • July 31, 2003
    • 260

    Correct '62 fan clutch & fan fasteners

    What is the correct configuration of fasteners for attaching (a) clutch fan to water pump hub and for (b) fan to clutch? Studs or bolts? Bolt markings? Etc. Thanks much,Charlie
  • Christopher R.
    Extremely Frequent Poster
    • March 31, 1975
    • 1599

    #2
    Re: Correct '62 fan clutch & fan fasteners

    They are Grade 8 bolts. 5/16-24 x 3/4" with lock washers. Don't know what the head marking is for the manufacturer. Paragon sells three different kinds. I thought they were black, but can't be sure. You do want a Grade 8 bolt in that application.

    Comment

    • Christopher R.
      Extremely Frequent Poster
      • March 31, 1975
      • 1599

      #3
      Re: Correct '62 fan clutch & fan fasteners

      One more thing. Don't forget the spacer or reinforcement that goes in between the nose of the water pump and the pulley. See the vendor catalogs for a picture of what I mean. Paragon has it as their part number 846.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"