Resource for sleeving wheel and master cylinders

[Mike M.]

for the last 15 or 20 years, i've used whitepost rest in va to sleeve these cylinders. since billy passed and his son has taken over, i'm told by an ex-employee that the machine capabilities aren't what they used to be. who are u guys using to sleeve your cylinders? thanks much, mike

[Gary C.]

Re: sosurce for sleeving wheel and master cylinders

Mike,

Have used the Florida guys CSSB with good success in the past.

Gary
....
14364 SW 139 Court
Miami, FL 33186
Phone: (305) 256-8077
Fax: (305) 253-3641
e-Mail: sales@cssbinc.com
Website: http://www.cssbinc.com

[Harry S.]

Re: sosurce for sleeving wheel and master cylinders

Mike, I just had ----> https://www.forums.ncrs.org/showthre...ht=minneapolis

put a SS sleeve in my 63 MC. They now charge $95.00 and that includes return shipping.

All I had them do is media blast/clean up the outside and sleeve it, I put a new kit in.

I will be bleeding the brakes this weekend. Best I can tell they did an excellent job.

[Guy M.]

Re: sosurce for sleeving wheel and master cylinders

Ive used Apple Hydraulics with good success

[Barry H.]

Re: sosurce for sleeving wheel and master cylinders

Mike, Richard Fortier has an ad in the latest Driveline P 20, for brass sleeving master cylinders. Sounds like a new service for him.
Barry

[Dick W.]

Re: sosurce for sleeving wheel and master cylinders

Mike,

Have used the Florida guys CSSB with good success in the past.

Gary
....
14364 SW 139 Court
Miami, FL 33186
Phone: (305) 256-8077
Fax: (305) 253-3641
e-Mail: sales@cssbinc.com
Website: http://www.cssbinc.com

Doc, CSSB are the "bus boys" that used to be at Carlisle. Had the old Greyhound converted to haul their goodies, good people to deal with.

[Nicholas L.]

Re: sosurce for sleeving wheel and master cylinders

Apple Hydraulics did a great job with my 1960 MC as well.

[Elwyn S.]

Re: sosurce for sleeving wheel and master cylinders

Mike, I had my original master cylinder and all 4 original wheel cylinders resleaved in April 2012 on my 1962 corvette by White Post restorations and all the parts were returned in a timely manner and looked new. They all worked like new, however I did go back to DOT 3/4. They had warranty concerns if I convered to DOT 5. I would use them again. Elwyn

[Scott P.]

Re: sosurce for sleeving wheel and master cylinders

Mike, plz try Mark Frappier Agawam MA 01001 413-781-8665 800-528-5235. Scott, neat zip code huh

[Richard M.]

Re: sosurce for sleeving wheel and master cylinders

Mike, call Ken McCormick at Lonestar Caliper Co. (903) 829-8400 nice guy.

Richard Mynatt

[Edward B.]

Re: sosurce for sleeving wheel and master cylinders

Apple Hydraulics exclusively for the past several years.

[Chris S.]

Re: Resource for sleeving wheel and master cylinders

for the last 15 or 20 years, i've used whitepost rest in va to sleeve these cylinders. since billy passed and his son has taken over, i'm told by an ex-employee that the machine capabilities aren't what they used to be. who are u guys using to sleeve your cylinders? thanks much, mike

- never had an issue.......

[Bill C.]

Re: Resource for sleeving wheel and master cylinders

Another vote for Apple Hydraulics, they have done dozens for me, never a problem and quick turnaround.