Water Pump Fittings 1969 427/400

[Ned T.]

I'd like to know which two fittings are to be used for the top and side of the water pump. Or do I have the correct ones here or not?

This is my first time adding a photo, I'll see it I got it right.

Thanks, Ned


Water Pump.JPG

[Joe L.]

Re: Water Pump Fittings 1969 427/400

I'd like to know which two fittings are to be used for the top and side of the water pump. Or do I have the correct ones here or not?

This is my first time adding a photo, I'll see it I got it right.

Thanks, Ned





[ATTACH=CONFIG]46298[/ATTACH]

Ned-----


#1 is generally correct for the bypass fitting;

#2 is generally correct for the intake manifold heater hose fitting;

#3 or #4 is generally correct for the waterpump heater hose nipple. I believe that either style could have been used. However, if your L-68 is equipped with C-60, then a shorter nipple was used, similar to #2.

[Ned T.]

Re: Water Pump Fittings 1969 427/400

Joe, Thank you for the information. This gets me a little closer to starting the engine in the chassis, which I expect to do in the very near future.