GF48 fuel filter gasket?

[Bruce B.]

Does anyone know of a source for the gasket that is used on the GF48 filter between the glass bowl and the top?
On my 62 340 HP the gasket is flat.
On the earlier dome top filters the gasket is "U" shaped and fits on the lip of the glass bowl.
I need both types.
Thanks,
Bruce B

[Terry D.]

Re: GF48 fuel filter gasket?

Dr. Rebuild shows the flat one in their catalog

[Bruce B.]

Re: GF48 fuel filter gasket?

Terry,
Thanks.
Unfortnately Doc only charges $4.00 for the gasket but $15.95 for shipping.
I found a few NOS GF 48 assemblies so I will just use one of them.
Keen Parts gets $7.00 for a replacement filter and gasket. so I'll get a few the next time I'm down there.
Bruce B

[Dennis C.]

Re: GF48 fuel filter gasket?

Bruce,

Maybe you could find an o-ring that would fit?

Dennis

[Bruce B.]

Re: GF48 fuel filter gasket?

Dennis,
Good idea.
Actually there are square section O Rings that might work also.
Bruce B

[Bruce B.]

Re: GF48 fuel filter gasket?

The gaskets are not available separately except from Keen Parts, but the filter and gasket are can be bought for about $4.00.
They are WIX 33034 or NAPA 3034.