1965 Corvette L79 Pulleys - NCRS Discussion Boards

1965 Corvette L79 Pulleys

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joseph A.
    Very Frequent User
    • June 20, 2012
    • 136

    1965 Corvette L79 Pulleys

    I have a 1965 L79 with AC & PS, The car was a basket case when I got it, I have the 533 2 groove pulley and the 232 single groove pulley for the crankshaft balancer but when I put them together there is a 3/8 space between the backsides of the 2 pulleys is this correct? When I tighten the balancer bolt it is going to twist the bottom of the front pulley.
  • Scott M.
    Expired
    • December 31, 1995
    • 216

    #2
    Re: 1965 Corvette L79 Pulleys

    The 3858533 crankshaft pulley and that add on pulley 3751232 do not play well together. I think the AIM is wrong regarding this combo, it didn't work on my '67 either, I just used the two place crankshaft pulley.

    Comment

    • Mark G.
      Very Frequent User
      • February 28, 2001
      • 227

      #3
      Re: 1965 Corvette L79 Pulleys

      Hi Joseph - Use a 3827843 add on pulley to the '533 pulley. The W/P is 3850979 (3848904 possible) and the P/S pulley is 3868892 single groove steel.
      Attached Files

      Comment

      • Joe L.
        Beyond Control Poster
        • January 31, 1988
        • 43198

        #4
        Re: 1965 Corvette L79 Pulleys

        Originally posted by Mark Gorney (35760)
        Hi Joseph - Use a 3827843 add on pulley to the '533 pulley. The W/P is 3850979 (3848904 possible) and the P/S pulley is 3868892 single groove steel.

        Mark------


        He might have a very tough time finding the 3827843 and the 3868892. The 3827843 was discontinued without supercession in 1975; the 3868892 was discontinued without supercession in 1976. I don't know that either are reproduced but the "Pulley King" might do them.
        In Appreciation of John Hinckley

        Comment

        • Mark G.
          Very Frequent User
          • February 28, 2001
          • 227

          #5

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"