My hood flew off
I though you might like this post from my other US forum . I had asked (JohnZ please reply) for the kind of adhesive that you use to re attach the support to the hood skin. I said how it flew off was a long story and I would explain later.
This was one of the replies and my reply back.
Once upon a time, there was this man, he had a car that he liked to drive. I mean, he drove it all the time, rain, snow, sun, night, there was not a road that this man did not like....
Side note
No new corvette owner would ever lose his hood. It was designed to stay on even if the latches popped open. It hinges in the front and opens from the rear, wind would just push it down...
Only a 44 year experienced corvette driver can lose his hood and not because the hinges broke.
You see...it was like this. 3 years ago I was getting the car ready for the 48 state trip. The motor was back in, I had been driving the car without hood, bumpers, windows, trim for a while to break it in. The car was due at the painter the next day and...
I want to see what the car looked like with all the chrome , bumpers etc put back on. It was battleship gray, but I had the time , I put on all the stuff.
Now we come to the hood. I just put the hood in place, no bolts in hinges, pushed the hood down so that it latched.
I was just going to look at it...honest...here is a picture
But, you know what happens. I started the car...I was only going to move it back to the garage, all of a sudden, I am going up my driveway, on to the road.
My heart is beating faster, should I do it ? I tell myself, I will only go 15 mph , only 15 no more...
I start down the road, keep it at 15, no problems, I am in heaven,
(I discovered the real reason for the hood coming off this week)
back to the story....so , I am driving along in first gear, I give it some gas and to my amazement the hood come flying over the windshield. By some unbelievable movement of my arm, I knock the hood up and off to the side....meanwhile, I am driving the damm car , trying to stay straight, and slowly I pull off to side of the road,
I could not imagine what I was going to find when I started walking back to where I thought the hood landed. And there is was, on its back on the grass, without a scratch or crack . However, the adhesive that holds the tabs on the support member to the skin had broken lose.
That is when the police officer came up to me...but that is another story.
I just got around to fixing it. ( The reason the hood came off, it was blow off by the radiator fan, not my driving speed. I stepped on gas in first, lots of air from fan, pushed directly up on hood that had no bolts holding it to hinges. )
Thank you JohnZ for the information on adhesive product. I picked up a Loctite brand as show in pictures.
All the tabs had broken lose from the skin during the flip and landing. You can see the thickness of the "gumdrop" original adhesive. I used a chisel to knock most of the stuff out in one piece as shown.
I will let it cure for 3 to 5 days since it is still cold in my garage. Give it a paint job and put back on car. A mess, just like from the factory !
This was one of the replies and my reply back.
Originally posted by PaulUptime
Once upon a time, there was this man, he had a car that he liked to drive. I mean, he drove it all the time, rain, snow, sun, night, there was not a road that this man did not like....
Side note
No new corvette owner would ever lose his hood. It was designed to stay on even if the latches popped open. It hinges in the front and opens from the rear, wind would just push it down...
Only a 44 year experienced corvette driver can lose his hood and not because the hinges broke.
You see...it was like this. 3 years ago I was getting the car ready for the 48 state trip. The motor was back in, I had been driving the car without hood, bumpers, windows, trim for a while to break it in. The car was due at the painter the next day and...
I want to see what the car looked like with all the chrome , bumpers etc put back on. It was battleship gray, but I had the time , I put on all the stuff.
Now we come to the hood. I just put the hood in place, no bolts in hinges, pushed the hood down so that it latched.
I was just going to look at it...honest...here is a picture
But, you know what happens. I started the car...I was only going to move it back to the garage, all of a sudden, I am going up my driveway, on to the road.
My heart is beating faster, should I do it ? I tell myself, I will only go 15 mph , only 15 no more...
I start down the road, keep it at 15, no problems, I am in heaven,
(I discovered the real reason for the hood coming off this week)
back to the story....so , I am driving along in first gear, I give it some gas and to my amazement the hood come flying over the windshield. By some unbelievable movement of my arm, I knock the hood up and off to the side....meanwhile, I am driving the damm car , trying to stay straight, and slowly I pull off to side of the road,
I could not imagine what I was going to find when I started walking back to where I thought the hood landed. And there is was, on its back on the grass, without a scratch or crack . However, the adhesive that holds the tabs on the support member to the skin had broken lose.
That is when the police officer came up to me...but that is another story.
I just got around to fixing it. ( The reason the hood came off, it was blow off by the radiator fan, not my driving speed. I stepped on gas in first, lots of air from fan, pushed directly up on hood that had no bolts holding it to hinges. )
Thank you JohnZ for the information on adhesive product. I picked up a Loctite brand as show in pictures.
All the tabs had broken lose from the skin during the flip and landing. You can see the thickness of the "gumdrop" original adhesive. I used a chisel to knock most of the stuff out in one piece as shown.
I will let it cure for 3 to 5 days since it is still cold in my garage. Give it a paint job and put back on car. A mess, just like from the factory !
Comment