56 power top - NCRS Discussion Boards

56 power top

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8376

    56 power top

    there were three design 56 power top harnesses.The first design had a TWO terminal deck lid safety switch and the trunk lid safety switches were located on the driver side . The second design harness had a FOUR terminal deck lid safety switch and the trunk lid safety switches were located on the drivers side. The third design harness had a FOUR terminal deck lid safety switch and the trunk lid safety switches were relocated to the pass side. Does anyone have the wiring diagram for the 2nd design harness, assuming its different than the third design. also could use a picture of the power top limit switches located on pass side atop the fuel tank cover. especially need to see the cable that attaches to the toggle switch and the bow assembly. thanks much,mike
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8376

    #2
    Re: 56 power top

    hey guys, forget the above request. after 2 weeks of screwing with the power top assembly, i finally figured it out. it works slick as snot. thanks for all your help. if it were a little later in the day, i'd celebrate with a couple beasts. mike

    Comment

    • Vinnie P.
      Editor NCRS Restorer Magazine
      • May 31, 1990
      • 1561

      #3
      Re: 56 power top

      Originally posted by Mike McCagh (14)
      hey guys, forget the above request. after 2 weeks of screwing with the power top assembly, i finally figured it out. it works slick as snot. thanks for all your help. if it were a little later in the day, i'd celebrate with a couple beasts. mike
      It's 5 o'clock somewhere!!!

      Comment

      • Gary J.
        Extremely Frequent Poster
        • April 1, 1980
        • 1231

        #4
        Re: 56 power top

        Must be pretty slick. How about a post on you tube?

        Comment

        • Steven B.
          Extremely Frequent Poster
          • June 30, 1982
          • 3981

          #5
          Re: 56 power top

          Originally posted by Mike McCagh (14)
          hey guys, forget the above request. after 2 weeks of screwing with the power top assembly, i finally figured it out. it works slick as snot. thanks for all your help. if it were a little later in the day, i'd celebrate with a couple beasts. mike
          Par topz will make you do that, but I wouldn't call it celebratin'.

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"