Offer a guess as to why these holes were drilled in dash support / C2 coupe

[Joe C.]

Re: Offer a guess as to why these holes were drilled in dash support / C2 coupe

Assault rifle.

[Douglas C.]

Re: Offer a guess as to why these holes were drilled in dash support / C2 coupe

Doug,

My '63 Convt. has an almost identical hole drilled through my trim tag as well. No other holes in the z-bar.

I've also wondered what a person would mount in that location.

On a positive note, it confirms a real trim tag - no one would spend the bucks for a fake trim tag and then drill it.

--Doug

[Terry M.]

Re: Offer a guess as to why these holes were drilled in dash support / C2 coupe

It is gutted now but but will do in the future. Regards

I hope to be around for a while. message me when you are ready. I am always up to have some fun with my students. Boredom sucks.

[Peter H.]

Re: Offer a guess as to why these holes were drilled in dash support / C2 coupe

I am a bit curious about thr big round hole that has been repaired below the heater box .. Just to date myself i drilled holes in the z bar to mount a cb radio in the mid seventies... PETER ...

[Doug W.]

Re: Offer a guess as to why these holes were drilled in dash support / C2 coupe

I assume that the 3" hole in the toe board was tied to the other holes in the Z bar. For now,all the evidence leads me to believe that add on A/C was installed. Will probably find other indications as this resto goes on.
Doug