72 or any year Underhood clips

[Rey S.]

How can I replicate the rubber coating on various underhood and dash clips used to hold wires and/or vacumn hoses ?
Thanks
Rey Stenhouse (26007)

[Terry M.]

Re: 72 or any year Underhood clips

Ray,
I have not used this so wait for others to chime in.

http://www.plastidip.com/home_solutions/Plasti_Dip

[Rey S.]

Re: 72 or any year Underhood clips

Hi Terry
What was the product name? I had the post reply But it dissappeared when I switched pages from other posts.
Thanks
Rey Stenhouse (26007)

[Jim M.]

Re: 72 or any year Underhood clips

Hi Rey: I have used the "Plasti-Dip" for this type of thing and it works excellent.

[Terry M.]

Re: 72 or any year Underhood clips

Hi Terry
What was the product name? I had the post reply But it dissappeared when I switched pages from other posts.
Thanks
Rey Stenhouse (26007)

Plasti-dip. It comes in a variety of colors -- on the chance you are doing a resto-rod. IIRC I got it from my local ACE Hardware store, but I have seen it in a lot of places.

[Alan S.]

Re: 72 or any year Underhood clips

Hi Rey,
I've used Plasti-Dip too.
I found that it took 2 'baths', with time to dry after the first bath, to get the thickness that my original pieces had.
Also, I learned to be careful to not get any air bubbles in the dip since they seem to want to come out on the dipped part. They then pop while drying on the clip and leave a little crater.
Good Luck!
Regards,
Alan

[Rey S.]

Re: 72 or any year Underhood clips

Thanks Alan -- I will look for it.
Rey Stenhouse (26007)

[Rey S.]

Re: 72 or any year Underhood clips

Hi Terry --
Thanks for the info.
Rey