62 dist cap, coil and spark plug wire needed - NCRS Discussion Boards

62 dist cap, coil and spark plug wire needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joseph P.
    Expired
    • September 7, 2009
    • 138

    62 dist cap, coil and spark plug wire needed

    I would like to find original or nos dist. cap, coil and spark plug wires if they exist. The coils I have found will not pass mustard. still looking for the rest. Thanks guys. Joe
  • John D.
    Extremely Frequent Poster
    • December 1, 1979
    • 5507

    #2
    Re: 62 dist cap, coil and spark plug wire needed

    Joe, Highly unlikely you will ever find the correct NOS 107 coil. YOu see the service replacement one that Delco sold is not the same. The plastic top has a different configuration. There has been one on Ebay for many months for around 695.00 or so and it's incorrect. John

    Comment

    • Joseph P.
      Expired
      • September 7, 2009
      • 138

      #3
      Re: 62 dist cap, coil and spark plug wire needed

      For 695.00 I can let it stay on ebay. It's an 091 coil, not FI .Thank God it's the wrong one at that price. I would have thought that some one out there would have started to make them. I know the market is small but you charge accordingly, IMHO. Joe

      Comment

      • William C.
        NCRS Past President
        • May 31, 1975
        • 6037

        #4
        Re: 62 dist cap, coil and spark plug wire needed

        What HP engine? there were single window and dual window caps also.
        Bill Clupper #618

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 43211

          #5
          Re: 62 dist cap, coil and spark plug wire needed

          Originally posted by Joseph Perez (50813)
          For 695.00 I can let it stay on ebay. It's an 091 coil, not FI .Thank God it's the wrong one at that price. I would have thought that some one out there would have started to make them. I know the market is small but you charge accordingly, IMHO. Joe
          Joe-----


          There are reproductions of most of the Corvette coils on the market now. However, I don't think that any are exact with respect to every nuance of detail. So, if you want one to be 100% correct in every way, then you have to find an original or NOS piece (the 1115091 coil was available in SERVICE).
          In Appreciation of John Hinckley

          Comment

          • Mike M.
            NCRS Past President
            • May 31, 1974
            • 8381

            #6
            Re: 62 dist cap, coil and spark plug wire needed

            todays repo coils(not the ones that were sleeved with copper cans 20+ years ago) have stainless posts and the judges put magnet to them on the judging fields. mike

            Comment

            • Joseph P.
              Expired
              • September 7, 2009
              • 138

              #7
              Re: 62 dist cap, coil and spark plug wire needed

              It's a single window. 327 250 hp. Good to know about the magnet. Thank you guys for the help. Joe

              Comment

              • Bruce B.
                Extremely Frequent Poster
                • May 31, 1996
                • 2930

                #8
                Re: 62 dist cap, coil and spark plug wire needed

                GUYS,

                Here is a correct 107 coil off my late 57 283 HP car.


                Bruce B107 COIL 002.jpg107 COIL 001.jpg

                Comment

                • John F.
                  Extremely Frequent Poster
                  • March 23, 2008
                  • 2406

                  #9
                  Re: 62 dist cap, coil and spark plug wire needed

                  Joe, My 62 250hp has the 091 original.

                  John F

                  Comment

                  • Joseph P.
                    Expired
                    • September 7, 2009
                    • 138

                    #10
                    Re: 62 dist cap, coil and spark plug wire needed

                    Originally posted by John Ftacek (48800)
                    Joe, My 62 250hp has the 091 original.

                    John F
                    John that's GREAT! I'll take it!! LOL. Does it have the number down low?

                    Comment

                    • Joseph P.
                      Expired
                      • September 7, 2009
                      • 138

                      #11
                      Re: 62 dist cap, coil and spark plug wire needed

                      Thanks for the pics Bruce, It helps to know what the original looked like. Joe

                      Comment

                      Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"