Carb Help Needed

[Gerard F.]

Re: Carb Help Needed

Mark,

Here's everything you ever wanted to know about a Holley 3810 restoration:

http://www.lbfun.com/warehouse/tech_...estoration.pdf

But unless you have the spare time and a lot of bucks, you'd be better off going to one of the restorers recommended above.

Have fun,

[Chris E.]

Re: Carb Help Needed

Steve -

Manual vs. automatic transmissions didn't affect the carburetor on 67's - 300hp and 350hp, manual or automatic (300hp only), all used the Holley 3810 with the ball at the bottom of the throttle lever. The Powerglide kickdown linkage adjustment procedure is shown in the '67 Assembly Manual, section M35, sheet A9.

John, just so I'm clear, even a 350hp 3810 would have had the automatic kickdown ball on the bottom of the throttle lever??

[Gerard F.]

Re: Carb Help Needed

Chris,

All the 3810's used the same throttle body and throttle lever.