59 Ingnition Switch Wiring Question - NCRS Discussion Boards

59 Ingnition Switch Wiring Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John F.
    Expired
    • December 31, 1999
    • 155

    59 Ingnition Switch Wiring Question

    Gents-

    See picture attached of my ingition switch.

    I have 2 connections for the IGN, 1 connectoin for SOL, 1 connection for ACC, 2 connections for BAT.

    I'm assuming the 18 guage pink goes to the single ACC connection

    the 14 guage ping goes to 1 of the IGN connections- what attaches on the other connection? anything?

    The red from the voltage meter goes to one of the 2 BAT connection - what if anything goes on the other connection?

    does anything go on the SOL connection?

    I'm conncerned I'm missing something if I have 3 open connections and the wiring diagram is difficult to read.

    thanksIMG_0842.jpg
  • John H.
    Beyond Control Poster
    • November 30, 1997
    • 16513

    #2
    Re: 59 Ingnition Switch Wiring Question

    Originally posted by John Farwell (33370)
    Gents-

    See picture attached of my ingition switch.

    I have 2 connections for the IGN, 1 connectoin for SOL, 1 connection for ACC, 2 connections for BAT.

    I'm assuming the 18 guage pink goes to the single ACC connection

    the 14 guage ping goes to 1 of the IGN connections- what attaches on the other connection? anything?

    The red from the voltage meter goes to one of the 2 BAT connection - what if anything goes on the other connection?

    does anything go on the SOL connection?

    I'm conncerned I'm missing something if I have 3 open connections and the wiring diagram is difficult to read.

    thanks[ATTACH=CONFIG]40403[/ATTACH]
    John -

    See the item below (by Dave Zuberer) for 1960 ignition switch wiring connections.


    IgnSwWiring1960.pdf

    Comment

    • John F.
      Expired
      • December 31, 1999
      • 155

      #3
      Re: 59 Ingnition Switch Wiring Question

      hello John H. that is a great picture. thanks!

      Comment

      • Philip P.
        Expired
        • February 27, 2011
        • 558

        #4
        Re: 59 Ingnition Switch Wiring Question

        Here is a redraw of the wiring for the switch may clear it up also.

        ignitionswitchf.jpg

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"