Fuse puller picture needed

[Rod M.]

Just purchased a 93 C4 and found out that it was missing the fuse puller that is mounted on the inside of the fuse panel. I need apicture of this puller to insure that I get the right part. If anyone has a picture please send it rodemcleod@gmail.com thanks for the help.

[Pat M.]

Re: Fuse puller picture needed

Rod, here's what my 96 puller looks like. It's got two little opposite facing "tooths" on the pulling end. I don't know if it's the same as 93.

[Bill H.]

Re: Fuse puller picture needed

pat's 96 looks different than my 92. The puller is labeled fuse on one side and breaker on the other.

[Pat M.]

Re: Fuse puller picture needed

pat's 96 looks different than my 92. The puller is labeled fuse on one side and breaker on the other.

Bill's correct. Mine is not labeled and looks shorter.

[Rod M.]

Re: Fuse puller picture needed

Thanks for the picture. I have been told that there were at least two different pullers in the C4 series. No one knows for sure which one is right for the 93. Since my car was built in late 92 I am going with the picture of the one from the 92. Thanks for sending the picture.

[Rod M.]

Re: Fuse puller picture needed

Bill, what is the length of your 92 puller?

[Tom H.]

Re: Fuse puller picture needed

Here's what it should look like ! Just happen to have one in my desk drawer !!!

[Bill H.]

Re: Fuse puller picture needed

Tom, That's the "newer" style but I have no idea what model year that change took place in.

Rod, It's easy to tell which you have. Look at the holder in the fuse door. My puller is roughly 3 1/2 in.
There's a slot in the tabs on the door for the black, metal tang to fit thru.
The picture quality isn't that good but....

[Rod M.]

Re: Fuse puller picture needed

Bill, Thanks for the picture of the panel with the fuse puller. My panel is the exactly same. Now I know which puller to get. Next I need to find an orginal A.I.R duct filter.

[Pat F.]

Re: Fuse puller picture needed

Rod, hope this helps.

My 1995 Corvette was built on August 4, 1994, second day of production.

[Rod M.]

Re: Fuse puller picture needed

Thanks Charlie, Looks like the puller is different from 94 thru 96. The 93 puller is much longer - 3.3/4

[Jim S.]

Re: Fuse puller picture needed

My '96 is also missing a fuse puller and based on replies to this thread I know which one to get - but where do I find one?

[Pat F.]

Re: Fuse puller picture needed

Jim, perhaps Tom Hendricks can tell us if this fuse puller was used any other GM Product.

[Tom H.]

Re: Fuse puller picture needed

My '96 is also missing a fuse puller and based on replies to this thread I know which one to get - but where do I find one?

Hey Jim ! Tell ya what. I will send you the one from my desk drawer. The one in my picture. Just PM me your address. If you ever stumble onto another one somewhere, just send it back ! Be glad to let you have this one. Tom

[Pat F.]

Re: Fuse puller picture needed

Tom, the desk drawer comes through again.

I was thinking that maybe these fuse pullers were on other era GM products. Just a thought.