62 Rocker Panel Molding Retainer - NCRS Discussion Boards

62 Rocker Panel Molding Retainer

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ed T.
    Expired
    • November 1, 2002
    • 95

    62 Rocker Panel Molding Retainer

    Does anyone have information on, or photos of, 62 Rocker Panel Molding Retainers. AIM calls out retainer strips but reproductions seem to be tabs...Ed
  • Erich C.
    Very Frequent User
    • January 31, 2007
    • 137

    #2
    Re: 62 Rocker Panel Molding Retainer

    Here are some photos of the retainers. I bought these from GM in the late 70's. The '62 retainer wasn't available even back then and these are for 63-67. I was told the retainers were the same shape but are longer ( 50" vs 45" for '62 ).
    The screw holes are also in the wrong place. The retainers are reproduced and listed for 62-67 with a note to cut down the retainer to 45" for '62
    Attached Files

    Comment

    • Ed T.
      Expired
      • November 1, 2002
      • 95

      #3
      Re: 62 Rocker Panel Molding Retainer

      Hello Erich,

      Thanks for the photos. I haven't found any similar retainer bars, but Corvette Centrol shows 8 small rectangular retainers tabs. Looks like one for each screw...Ed

      Comment

      • Erich C.
        Very Frequent User
        • January 31, 2007
        • 137

        #4
        Re: 62 Rocker Panel Molding Retainer

        The long retainers are available at C.C or Paragon. Type in part #332010 for C.C or #5916 for Paragon.
        Erich

        Comment

        • Ed T.
          Expired
          • November 1, 2002
          • 95

          #5
          Re: 62 Rocker Panel Molding Retainer

          Thanks Erich. Not sure how I missed it. I was looking at C.C. #331296 Rocker Moulding Retainer...Ed

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"