Help in getting brake drum off - rusted to hub! - NCRS Discussion Boards

Help in getting brake drum off - rusted to hub!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Paul J.
    Expired
    • September 9, 2008
    • 2091

    #16
    Re: Help in getting brake drum off - rusted to hub!

    Originally posted by Joe Mish (43421)
    Stu gave great advice!

    Stuck to the shoes.....the hammer traditionally used to pound drums off would have taken care of the rust connection
    I disagree. The OP said in his first post that the drum turned freely. Stu assumed that the drum might be grooved causing the shoes to hold it on. If this were the case, the drum would still move a little back and forth and not be fixed hard against the hub. The drum was rusted on, probably at the studs. That's where it usually occurs.

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"