1972 storage compartment - NCRS Discussion Boards

1972 storage compartment

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Peter T.
    Infrequent User
    • February 20, 2012
    • 29

    1972 storage compartment

    Can anyone tell me if the battery compartment should have 2 rubber bumpers for the lid? Mine has 2 screws in the only holes in the 'lip' on the latch side and the holes are counter sunk. The aim is not real clear on this (at least to me!!). Without bumpers the lid goes down way too far. The holes are not evenly spaced from the latch either which seems weird.
    Thanks alot
  • Larry M.
    Expired
    • November 30, 1986
    • 541

    #2
    Re: 1972 storage compartment

    Peter,

    It sounds as if you're missing the foam rubber gasket that is glued onto the frame that the lid closes against.

    Larry

    Comment

    • Peter T.
      Infrequent User
      • February 20, 2012
      • 29

      #3
      Re: 1972 storage compartment

      Larry,

      Is that the only compartment that has a foam gasket? My other 2 compartments (jack & storage) have 2 rubber bumpers.

      Thanks for your reply, Pete

      Comment

      • Reba W.
        Very Frequent User
        • June 30, 1985
        • 932

        #4
        Re: 1972 storage compartment

        Yes, that is the only compartment that has the gasket. This is spelled out in the 1970-72 Technical Information and Judging Guide.
        Last edited by Reba W.; May 17, 2012, 04:05 PM.

        Comment

        • Peter T.
          Infrequent User
          • February 20, 2012
          • 29

          #5
          Re: 1972 storage compartment

          Thanks alot, mystery solved! Back to Doc Rebuild. My '72 is also Elkhart Green.

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"