Valve cover restoration guy??? - NCRS Discussion Boards

Valve cover restoration guy???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ken J.
    Expired
    • May 11, 2008
    • 95

    Valve cover restoration guy???

    Guys;
    I am in need of a GOOD Valve cover restoration guy for two mid year aluminum covers. Let me know your experiences and Resto. Guys, Please.
    Thanks.
    Ken Joseph
  • Domenic T.
    Expired
    • January 28, 2010
    • 2452

    #2
    Re: Valve cover restoration guy???

    I know I will get bashed for this BUT I find NO damage if I powder blast aluminum.

    Fine glass bead works great and I have compared the aluminum to other aluminum of the same and see no difference other than it is clean after powder blasting and the black corrosion is also gone.

    I also tried the acid we use on aircraft aluminum (brightner) but it does not do as goos a job.

    I have tried to understand the "re-skin process" and know you can't really re-skin cast aluminum, so they must be using similar process.

    Tumbling or vibrating in walnut shell wouldn't remove deep corrosion as I have tried that with small castings

    DOM

    Comment

    • Mike F.
      Expired
      • April 25, 2011
      • 668

      #3
      Re: Valve cover restoration guy???

      This guy, http://www.z28camaro.com/
      Attached Files
      Last edited by Mike F.; April 19, 2012, 06:52 PM.

      Comment

      • Gary B.
        Extremely Frequent Poster
        • January 31, 1997
        • 6994

        #4
        Re: Valve cover restoration guy???

        Originally posted by Ken Joseph (49012)
        Guys;
        I am in need of a GOOD Valve cover restoration guy for two mid year aluminum covers. Let me know your experiences and Resto. Guys, Please.
        Thanks.
        Ken Joseph
        Ken,

        Fellow DB poster, John DeGregory, does a great job restoring valve covers. He did mine and I'm very pleased with the results.

        Gary

        Comment

        • Bob J.
          Very Frequent User
          • November 30, 1977
          • 713

          #5
          Re: Valve cover restoration guy???

          John DeGregory did a great job refinishing my valve covers.
          Bob

          Comment

          • Dick W.
            Former NCRS Director Region IV
            • June 30, 1985
            • 10483

            #6
            Re: Valve cover restoration guy???

            Originally posted by Domenic Tallarita (51287)
            I know I will get bashed for this BUT I find NO damage if I powder blast aluminum.

            Fine glass bead works great and I have compared the aluminum to other aluminum of the same and see no difference other than it is clean after powder blasting and the black corrosion is also gone.

            I also tried the acid we use on aircraft aluminum (brightner) but it does not do as goos a job.

            I have tried to understand the "re-skin process" and know you can't really re-skin cast aluminum, so they must be using similar process.

            Tumbling or vibrating in walnut shell wouldn't remove deep corrosion as I have tried that with small castings

            DOM
            Step up and spend $30k and buy a Wheelabrator. That will do the job
            Dick Whittington

            Comment

            • Clem Z.
              Expired
              • December 31, 2005
              • 9427

              #7
              Re: Valve cover restoration guy???

              Originally posted by Dick Whittington (8804)
              Step up and spend $30k and buy a Wheelabrator. That will do the job
              i remember seeing wheelabrators used to surface finish aluminum sheets that were used to make selenium rectifiers back in the 50s. they put the finish on the aluminum sheets before the selenium was deposited
              Attached Files

              Comment

              • Joe R.
                Extremely Frequent Poster
                • July 31, 1976
                • 4549

                #8
                Re: Valve cover restoration guy???

                FI Art (John DeGregory) does fine work and takes pride in producing a great product that will grace any NCRS restoration.

                JR

                Comment

                • Richard S.
                  Very Frequent User
                  • July 31, 2006
                  • 187

                  #9
                  Re: Valve cover restoration guy???

                  John did mine 6mo ago. Great job.

                  Comment

                  • John D.
                    Extremely Frequent Poster
                    • November 30, 1979
                    • 5507

                    #10
                    Re: Valve cover restoration guy???

                    You guys are too kind. Thanks

                    Comment

                    • Dick W.
                      Former NCRS Director Region IV
                      • June 30, 1985
                      • 10483

                      #11
                      Re: Valve cover restoration guy???

                      Originally posted by John DeGregory (2855)
                      You guys are too kind. Thanks
                      They don't know the real FIPhart do they?
                      Dick Whittington

                      Comment

                      • Joe R.
                        Extremely Frequent Poster
                        • July 31, 1976
                        • 4549

                        #12
                        Re: Valve cover restoration guy???

                        Originally posted by Dick Whittington (8804)
                        They don't know the real FIPhart do they?
                        Oh yeah they do! Just showing my soft side!

                        JR

                        Comment

                        • Paul J.
                          Expired
                          • September 9, 2008
                          • 2091

                          #13
                          Re: Valve cover restoration guy???

                          Originally posted by Bob Jorjorian (1619)
                          John DeGregory did a great job refinishing my valve covers.
                          Bob
                          Same here.

                          Comment

                          • Ken J.
                            Expired
                            • May 11, 2008
                            • 95

                            #14
                            Re: Valve cover restoration guy???

                            Guys;
                            Thanks for the info. I talked to John DeG and am shipping them out to him for the restoration.
                            Thanks Again.
                            Ken Joseph

                            Comment

                            Working...
                            Searching...Please wait.
                            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                            Please push the back button and reload the previous window.'
                            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                            Please push the back button and reload the previous window.'
                            An internal error has occurred and the module cannot be displayed.
                            There are no results that meet this criteria.
                            Search Result for "|||"