Any one know Joe Calcagno?

[David H.]

I found a Restorer Article written by Joe Calcagno about the type of body lift frame that I want to build.
Was hoping to discuss it with him, but dont find him in the member list.
Anyone know him? how to get in touch with him?

thanks

[Philip P.]

Re: Any one know Joe Calcagno?

http://rarecorvettes.com/RARE/HOME.html He is the owner of Rare Corvettes in California. Very knowledgeable on C1 cars, always helpful.
Phil

[Terry M.]

Re: Any one know Joe Calcagno?

Joe posts here. Check the button above labeled "COMMUNITY" under that drop down you will see "MEMBER LIST." Go look him up on there and you can send him an email or PM through this board.

[John F.]

Re: Any one know Joe Calcagno?

Joe is a great guy and writes fantastic easy to follow tech articles. His phone number is (831)475-4442.

John F

[Willard M.]

Re: Any one know Joe Calcagno?

The one article by Joe that I remember the most is about the 62 that fell off of a lift during an earthquake. It was not a pretty sight.

[Don H.]

Re: Any one know Joe Calcagno?

I too have thought about the "lift incident" article, usually when looking at lift displays. He was not using a four post when that happened and I wondered if it would have on one. Don H.

[Paul J.]

Re: Any one know Joe Calcagno?

The one article by Joe that I remember the most is about the 62 that fell off of a lift during an earthquake. It was not a pretty sight.

Sometimes it happens without the earthquake.

[Joe L.]

Re: Any one know Joe Calcagno?

I too have thought about the "lift incident" article, usually when looking at lift displays. He was not using a four post when that happened and I wondered if it would have on one. Don H.

Don-----


Living in earthquake country myself (virtually right on the notorious Hayward Fault), if I ever get a lift, it will be the four post type. I would NEVER use a "2 poster" here. Never.