A/C Cable Dash Installation - NCRS Discussion Boards

A/C Cable Dash Installation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Robert M.
    Expired
    • March 21, 2011
    • 2

    A/C Cable Dash Installation

    Hello Everyone:

    When I install the upper left and upper right a/c cables, after tightening the nut there is about 1/4 inch of play left where the nut does not pull the cable tight to the dash. I am only experiencing the problem with the upper a/c cables. The bottom right (defroster) and left (blower switch) cables tighten nicely to the dash. I can't find anything in the assembly manual that I am missing, but I am obviously doing something wrong. All equipment is original. 65 roadster.

    Thank you for the help,
    Bob.
  • Dale S.
    Expired
    • November 12, 2007
    • 1224

    #2
    Re: A/C Cable Dash Installation

    Looks like you have everyone stumped. Dale

    Comment

    • Robert M.
      Expired
      • March 21, 2011
      • 2

      #3
      Re: A/C Cable Dash Installation

      Hi Dale:

      Everyone is stumped because of my misinformation. I stated that I had everything installed and I now realize I did not. I was sent a PM from a member and he ask if I had the center dash vent installed (which I didn't). Then the light bulb went off. I disassembled everything over 2 years ago and did not remember the center dash piece and I find the drawings in the assembly manual difficult to visualize sometimes. Now I just have to find the center dash duct. Way too many parts laying around. Sorry for the confusion.

      Best Regards,
      Bob

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"