62 extra ground on valve cover - NCRS Discussion Boards

62 extra ground on valve cover

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brian B.
    Infrequent User
    • November 22, 2010
    • 20

    62 extra ground on valve cover

    I have an extra (3rd ) ground wire on my passenger side valve cover. One goes to the wiper motor mount , another to the radio . I believe these are ok. The other one goes to a screw on the heater blower in the passenger side under the dash. Is this original , or did someone add this for reliability. If so , how should the heater be grounded.
    Thanks ..
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: 62 extra ground on valve cover

    Originally posted by Brian Beauchamp (52458)
    I have an extra (3rd ) ground wire on my passenger side valve cover. One goes to the wiper motor mount , another to the radio . I believe these are ok. The other one goes to a screw on the heater blower in the passenger side under the dash. Is this original , or did someone add this for reliability. If so , how should the heater be grounded.
    Thanks ..
    Brian -

    That's a common modification to ensure a good ground for the heater blower. The production ground is through the sheath of the temp cable to the back side of the console plate, which is flaky at best.

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"