62 FI Tach Cable Boot - NCRS Discussion Boards

62 FI Tach Cable Boot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Patrick S.
    Very Frequent User
    • January 1, 1988
    • 209

    62 FI Tach Cable Boot

    How there a way to install a tach cable boot (Corvair type repo) over the rather large end of the cable assembly? Cutting the small end did not work because the bellows usually will split. Am I missing some trick?
    Did the original boot come attached to the cable or did the original parts stretch enough to go over the cable nut? The repos don't.
  • Terry D.
    Extremely Frequent Poster
    • May 31, 1987
    • 2691

    #2
    Re: 62 FI Tach Cable Boot

    Patrick
    The repos will stretch, check the archives for a solution. If you can't find it call me. I used a very small funnel, cut it down to size of end of cable nut, put the boot in hot water to soften it, then stretch it over funnel onto and over nut and onto cable.
    Terry

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"