Vented Spash Shields - NCRS Discussion Boards

Vented Spash Shields

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Don Z.
    Expired
    • August 31, 1998
    • 254

    Vented Spash Shields

    In the Fall 2006 Restorer, Volume 33, #2 there was an article by Arland Dower regarding venting spash shields. I ran a copy of this article and put it on my things to do list, as I think it may be worth doing. I was wondering if other members have done this and thoughts on if it does indeed help. I have a small block. Thank You
  • Jeff S.
    Very Frequent User
    • July 31, 1984
    • 383

    #2
    Re: Vented Spash Shields

    Don

    I fabricated a set using 1100 aluminum sheet stock & saved my OEM stamped steel shields. The hardest part for me was finding an ol' hot-rodder with a louver press. I'm not sure if they really did any good; it's difficult to make a comparison when only putting on a 1-2K miles/year.
    Last edited by Jeff S.; December 7, 2011, 08:11 PM.

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"