Replacement Wiper Arms - NCRS Discussion Boards

Replacement Wiper Arms

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Roger G.
    Frequent User
    • February 28, 2011
    • 92

    Replacement Wiper Arms

    I am considering buying some replacement wiper arms from Paragon or Corvette Central. Has anybody had any experience with the reproductions? Quality acceptable?

    My car currently has replacement arms, the passenger side arm sits too high, interferes with the wiper door. The geometry of the arm looks different than the originals. Only way it comes close is to set it up so that the passenger side parks below the driver's side.
  • Terry M.
    Beyond Control Poster
    • September 30, 1980
    • 15596

    #2
    Re: Replacement Wiper Arms

    Tom Keen of Keen Parts, makes reproductions of 1970-1972 Corvette windshield wiper arms. Just a guess on my part, but the other vendors may be selling his product -- I don't know. I have had a chance to look at Tom's product, and it is pretty good.

    http://www.keenparts.com/downloads/KeenC3Catalog.pdf
    Terry

    Comment

    • Mark D.
      Extremely Frequent Poster
      • June 30, 1988
      • 2151

      #3
      Re: Replacement Wiper Arms

      Lyle Chamberlain, a member here, will sell you refurbished originals and they are beautiful. I've bought several sets from him.

      If you want to add the NOS rubber inserts, well, a member here by the name of Pete Lindahl has those. I've bought several sets from him and they are beautiful as well.

      Both great guys.

      Mark
      Kramden

      Comment

      • Roger G.
        Frequent User
        • February 28, 2011
        • 92

        #4
        Re: Replacement Wiper Arms

        Hi Mark

        Sounds very interesting. How do I contact Lyle Chamberlain?
        Any idea what he charges?

        Comment

        • Roger G.
          Frequent User
          • February 28, 2011
          • 92

          #5
          Re: Replacement Wiper Arms

          Originally posted by Terry McManmon (3966)
          Tom Keen of Keen Parts, makes reproductions of 1970-1972 Corvette windshield wiper arms. Just a guess on my part, but the other vendors may be selling his product -- I don't know. I have had a chance to look at Tom's product, and it is pretty good.

          http://www.keenparts.com/downloads/KeenC3Catalog.pdf
          Hi Terry,

          I'll keep Tom in mind. Never heard of Keen parts. Took a look at his catalog. Looks like a wide selection.

          The other vendor I've looked at noted the wiper arms are 'imports'. From all I've been reading, makes a bit nervous unless someone can vouch for the parts.

          Comment

          • Kenn S.
            Very Frequent User
            • September 10, 2009
            • 173

            #6
            Re: Replacement Wiper Arms

            I bought a set of restored wiper arms from Al (sticks_it4105qhtc@members.ebay.com), and they're also beautiful. If you visit his eBay store, he talks about the Top Flights he's restored and the cars that have used his arms. I've not had my car judged yet, but I can say these arms are quite something. Wish all the parts I'm finding looked as nice. Al is a NCRS member and does this as a hobby...
            -Kenn
            1970 LS-5
            1970 350/300
            1980 L-48
            2004 LS-1

            Comment

            • Les G.
              Expired
              • December 5, 2008
              • 158

              #7
              Re: Replacement Wiper Arms

              I had the same problem with the replacement wiper arms from Paragon/Keen parts. I from original ones at Carlisle. Send me a PM I think I have a spare if you are interested.

              Comment

              • Roger G.
                Frequent User
                • February 28, 2011
                • 92

                #8
                Re: Replacement Wiper Arms

                Originally posted by Les Goldberg (49765)
                I had the same problem with the replacement wiper arms from Paragon/Keen parts. I from original ones at Carlisle. Send me a PM I think I have a spare if you are interested.
                Sent a PM.
                Thanks

                Comment

                Working...
                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"