'73 Lower Rubber Air Dam w/Rivets

[Tom R.]

Re: '73 Lower Rubber Air Dam w/Rivets

Way to go Peter!! It looks just like mine did with the wrinkles and the whole bit. Can't tell from the cheesy factory part. Congrats.

Tom

[Pat M.]

Re: '73 Lower Rubber Air Dam w/Rivets

Can't tell from the cheesy factory part.

I think you just created a new NCRS moto!

[John M.]

Re: '73 Lower Rubber Air Dam w/Rivets

Peter, Thanks for posting the picture and the mention of my name. I think for a couple of old hacks we "done good." John Marsico

[Peter G.]

Re: '73 Lower Rubber Air Dam w/Rivets

Since I have gone thru all this for this piece...I would like to have it as accurate as possible. Everyone has provided much research and have invested their time too.

There is some discussion as to the "color" of the factory original rivets. Natural aluminum or black anodized?

[Scott O.]

Re: '73 Lower Rubber Air Dam w/Rivets

Here's a link showing the installation
Scott

http://willcoxcorvette.com/instructions/FRONT_SPOILER_MOUNTING_1973-1979.pdf

[Peter G.]

Re: '73 Lower Rubber Air Dam w/Rivets

Terry...replacing my front airdam/extension assy....anyway do you remember if the metal brackets were behind the plastic air dam or between the rubber extension and the plastic airdam? In the picture from the AIM...it looks like the metal bars are BETWEEN the two items?

Thanks, Peter

[Peter G.]

Re: '73 Lower Rubber Air Dam w/Rivets

Ken..your pic looks like the metal brackets are BEHIND the plastic airdam?? Is that correct??

Thanks, Peter

[Terry M.]

Re: '73 Lower Rubber Air Dam w/Rivets

Terry...replacing my front airdam/extension assy....anyway do you remember if the metal brackets were behind the plastic air dam or between the rubber extension and the plastic airdam? In the picture from the AIM...it looks like the metal bars are BETWEEN the two items?

Thanks, Peter

Sorry Pete, I have no recollection of those details.