1954 motor mount shims
Nolands book indicates motor mount shims to be installed on the right side only between the frame and mount bracket. Has anyone run accross this? How big and how many? Thanks as always!!
-
-
Re: 1954 motor mount shims
FYI the shims are 1/32 inch thick and slip into place. can easily be made out of sheet metal and will need 4 or 5 on the right side only. Left side is tight. -
Re: 1954 motor mount shims
My 54 had 3 shims on rt motor mount to frame upper bolts.Comment
-
Re: 1954 motor mount shims
Shims are generally always on the right side. The amount varies depending on the frame rail.Comment
Comment