Clutch Pedal Bracket.

[Ralph B.]

These clutch pedal brackets apparently have 2 ways to attach the mounting bolts. The lower bolt is through a elongated slot and the upper bolt appears to be able to go into either of the the 2 holes.

What is the reason for having 2 holes?

And which hole was originally used, the inboard hole or the outboard one?

Thank you,
Ralph

[Wayne M.]

Re: Clutch Pedal Bracket.

....What is the reason for having 2 holes ? And which hole was originally used, the inboard hole or the outboard one? ....

Bolt in forward bracket hole = quick action (low) clutch pedal.

Factory setting is rear hole (standard pedal height = higher).

Also, don't forget the transmission levers (long throw [upper holes] = factory).