57 voltage regulator - NCRS Discussion Boards

57 voltage regulator

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Susan M.
    Expired
    • January 10, 2011
    • 63

    57 voltage regulator

    I am looking for a date correct voltage regulator for a June 1957 built car. I understand Delco Remy 1119001 7A, B, C or D... would be correct. Any recommendations? Thanks for your help!
  • Dick W.
    Former NCRS Director Region IV
    • June 30, 1985
    • 10483

    #2
    Re: 57 voltage regulator

    John Pirkle Sr 706 860-9047 priklesr@aol.com
    Dick Whittington

    Comment

    • David L.
      Expired
      • July 31, 1980
      • 3310

      #3
      Re: 57 voltage regulator

      I have a "1119001 E" regulator but it is dated "2A" (Jan. 1962). After some research I found that it was used on 1962 Canadian Pontiacs.

      Comment

      • Joe M.
        Extremely Frequent Poster
        • April 30, 1990
        • 1338

        #4
        Re: 57 voltage regulator

        i did not have any luck getting Mr. Pirkle to return my e-mails, but telephone calls are answered promptly. 706-860-9047

        Comment

        • Joe M.
          Extremely Frequent Poster
          • April 30, 1990
          • 1338

          #5
          Re: 57 voltage regulator

          i just purchased a 1959 date code 9001 voltage regulator from him and with shipping it was $182. He said it would take about 4 weeks from start of restoration to delivery. He does not always have a rebuilt/restored regulator ready to ship.

          Comment

          • Susan M.
            Expired
            • January 10, 2011
            • 63

            #6
            Re: 57 voltage regulator

            Originally posted by Dick Whittington (8804)
            John Pirkle Sr 706 860-9047 priklesr@aol.com

            HELLO DICK,
            THANK YOU SO MUCH !!! I SENT AN EMAIL AND WILL CALL TOMORROW.
            REGARDS, SUSAN

            Comment

            • Susan M.
              Expired
              • January 10, 2011
              • 63

              #7
              Re: 57 voltage regulator

              Originally posted by David Liukkonen (3775)
              I have a "1119001 E" regulator but it is dated "2A" (Jan. 1962). After some research I found that it was used on 1962 Canadian Pontiacs.

              THANKS FOR YOUR RESPONSE. I'LL KEEP SEARCHING FOR A CORRECT DATED UNIT... REGARDS, SUSAN

              Comment

              • Susan M.
                Expired
                • January 10, 2011
                • 63

                #8
                Re: 57 voltage regulator

                Originally posted by Joe Maulsby (17166)
                i did not have any luck getting Mr. Pirkle to return my e-mails, but telephone calls are answered promptly. 706-860-9047

                JOE,

                THANKS FOR THE INFORMATION AND ADVICE. I WILL GIVE A CALL IN THE A.M.

                REGARDS, SUSAN

                Comment

                • David L.
                  Expired
                  • July 31, 1980
                  • 3310

                  #9
                  Re: 57 voltage regulator

                  Susan,

                  I just found a Delco Remy "1119001" voltage regulator at the Mansfield, MA, swap meet today (05/14/2011) but the date code is way too early, "6H" (August 1956) for your June 1957 car.

                  Dave

                  Comment

                  • Susan M.
                    Expired
                    • January 10, 2011
                    • 63

                    #10
                    Re: 57 voltage regulator

                    Wow. Thank you so much for looking. They are not easy to find. I think that date is a bit too early but I will double check on that. Regards, Susan

                    Comment

                    Working...
                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"