Engine Bay factory marks

[Joseph K.]

Does any one have/know what factory marks would be in the engine bay for a 69 SB. If possible I need example pictures.

Thanks in advance for your help. Joe

[Alan S.]

Re: Engine Bay factory marks

Hi Joe,
I'll start by asking a question.
Do you mean 'stickers', ink stamps, crayon marks?
Maybe all of them?
This will also get you to the top again for some new looks!
Regards,
Alan

[Joseph K.]

Re: Engine Bay factory marks

Hi Joe,
I'll start by asking a question.
Do you mean 'stickers', ink stamps, crayon marks?
Maybe all of them?
This will also get you to the top again for some new looks!
Regards,
Alan

Allan

Crayon marks in the engine compartment would be great.

Thanks

[Edward J.]

Re: Engine Bay factory marks

Joe, on my 72 the crayon marks are on the left and right toe boards, One is the job number (pass side) the other is PB (which I Think is power brakes). I did also find a number stamp under the pass. side fender.

Most of the time these marks will stay there and don't seem to be affected by the elements or time. there can be hidden under the black out.

[Michael D.]

Re: Engine Bay factory marks

You could find factory shorthand markings for the job number, usually on the passenger's side toe kick, PB for power bakes, UA6, PW, etc.

[Joseph K.]

Re: Engine Bay factory marks

You could find factory shorthand markings for the job number, usually on the passenger's side toe kick, PB for power bakes, UA6, PW, etc.

Thank you this is a big help. My next project is to put all the marks in the engine bay, frame, and drive shaft. Have the stencils just hope I get lucky and get it right.

[Dino L.]

Re: Engine Bay factory marks

Here is a picture of my original May 1970 vert with a yellow crayon job number upper driver side of inside of hood.....there is also a white daub of paint 1" diameter on Power Brake Booster....

[Joseph K.]

Re: Engine Bay factory marks

Here is a picture of my original May 1970 vert with a yellow crayon job number upper driver side of inside of hood.....there is also a white daub of paint 1" diameter on Power Brake Booster....

Dino,

Was that the factory job that was scribbled on the hood.
Joe