About My P C & 69 B B

[Jerry H.]

THANKS TO ALL FOR THE WELCOME NOTES
in response to JIM TREKELLs request the 78 P C is mostly un touched I have had to replace fan belts battery and mufflers bought from a friend who needed money for out of state tuition never rained on so i was told same after I got the car he put it in some local car shows i'm sure he polished the heck out of it that might explain some of the thin paint so thin it's embarrassing L82 auto all options but no CB The 69 BB is a driveable basket case 427/435 CE motor 4 speed it's due to be restored my plans are to make it a work in progress always leaning toward a #s matching car finding parts stripping paint chrome work brake work exhaust ect. then when all ducks are in a row pull the body the CE motor has good compression will have to leave it for now Ihave a 16 in. I beam in my garage with 2 1ton trollies will be buying a 4 post lift american made is it OK to Email Mr. Turley I think that his name I don't want to impose thanks again for all the welcome notes great people to b assoicated with just glad to be a part of it all .

[Tom H.]

Re: About My P C & 69 B B

Hey Jerry !!! Again, glad to have you. As for the Pace Car, thin paint was pretty typical on those. Looking forward to hearing more about your cars and maybe some pictures sometime !!

[Jerry H.]

Re: About My P C & 69 B B

Tom about sending pictures i will have to recrute some help from one of my two adult kids i don't know a mega pix from a micro pizza but i'm learning. You might be able to help me find a member in the fall Restorer Mark Davis earned top flight on a 60 and 77 at Queen City Rregional it shows him living in Barboursville Wv. the only Mark Davis i can find lives in South Carolina. maybe i did something wrong in my member search . I don't know of any chapters or clubs close to Huntington Wv.Would like to join one the closer the better

[Joe R.]

Re: About My P C & 69 B B

THANKS TO ALL FOR THE WELCOME NOTES
in response to
is it OK to Email Mr. Turley I think that his name.

Jerry,

I have had good luck with PMs and emails sent through this board. I would suggest reading some theads on here about lifts, lots of good info here. I was going to get a 4 post lift and park my wife's car under mine. But I don't have the ceiling height. I think I will get a two post now, it's better for working on the car.

Joe

[Terry M.]

Re: About My P C & 69 B B

Tom about sending pictures i will have to recrute some help from one of my two adult kids i don't know a mega pix from a micro pizza but i'm learning. You might be able to help me find a member in the fall Restorer Mark Davis earned top flight on a 60 and 77 at Queen City Rregional it shows him living in Barboursville Wv. the only Mark Davis i can find lives in South Carolina. maybe i did something wrong in my member search . I don't know of any chapters or clubs close to Huntington Wv.Would like to join one the closer the better

Jerry -- if you searched members from the button at the top of the page on this board, you are searching for members who have signed up to participate in this board. That is only 5 to 8 thousand of the 15 to 16 thousand NCRS members. Perhaps the Mark Davis you are looking for is not among those registered on this board.

[Jerry H.]

Re: About My P C & 69 B B

Joe i have looked at i think most of the info on two and four post lifts the reason i'm going to email Mark Tulley is i want to be able to lift my dulley as well store the PC. I have a 16 in. I beam that i put in when i built the garage it is 11ft. to the bottom of I beam. I also wired 220v on both sides of i would like to be able to move 4 post lift with a car on it in the down position. I dont know the weight limit on the dollies or the width i will need to lift the dullie also i'm in NJ a couple times a year i see he's in NY might be able to save some shipping cost J Howard

[Joe R.]

Re: About My P C & 69 B B

Joe i have looked at i think most of the info on two and four post lifts the reason i'm going to email Mark Tulley is i want to be able to lift my dulley as well store the PC. I have a 16 in. I beam that i put in when i built the garage it is 11ft. to the bottom of I beam. I also wired 220v on both sides of i would like to be able to move 4 post lift with a car on it in the down position. I dont know the weight limit on the dollies or the width i will need to lift the dullie also i'm in NJ a couple times a year i see he's in NY might be able to save some shipping cost J Howard

Jerry,

It sounds like you have a plan pretty well mapped out for your lift. Please let us know how you proceed. I will be going down this road soon and I'm sure others will too.

Good luck!
Joe