69 Solenoid mounting - NCRS Discussion Boards

69 Solenoid mounting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jeffrey S.
    Extremely Frequent Poster
    • May 31, 1988
    • 1882

    69 Solenoid mounting

    Hello all! Could someone confirm the mounting position of the solenoid in the attached thumbnail. When I removed the part to have the tach looked at, I neglected to take a photo and I put it back in the only screw hole there was but it differs from the AIM page which is very hard to read. I THINK it's right but woud like to have someone who's been there to confirm. Thanks!
    Jeff
    Attached Files
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43218

    #2
    Re: 69 Solenoid mounting

    Originally posted by Jeffrey Salz (13182)
    Hello all! Could someone confirm the mounting position of the solenoid in the attached thumbnail. When I removed the part to have the tach looked at, I neglected to take a photo and I put it back in the only screw hole there was but it differs from the AIM page which is very hard to read. I THINK it's right but woud like to have someone who's been there to confirm. Thanks!
    Jeff

    Jeff-----


    It's correct.
    In Appreciation of John Hinckley

    Comment

    • Jeffrey S.
      Extremely Frequent Poster
      • May 31, 1988
      • 1882

      #3
      Re: 69 Solenoid mounting

      Joe,
      Thanks for your response. It seemed right but the AIM shows the harness strap below the solenoid not above as in the photo. I just needed clarification.
      Jeff

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"