67 ps pulley nut - NCRS Discussion Boards

67 ps pulley nut

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Craig O.
    Very Frequent User
    • July 31, 1983
    • 207

    67 ps pulley nut

    can someone post a photo of an original pulley shaft nut, I seem to have lost mine and don't know if the repos are the same.
  • Rich P.
    Expired
    • January 12, 2009
    • 1361

    #2
    Re: 67 ps pulley nut

    Craig,

    repro nuts are incorrect they are a nylock nut. The original nuts are a stover nut. Looks similar to original exhaust manifold nuts. They have a flat side where the hex is then the other 1/2 is taperd down to a smooth circle. I have some originals If no one post a picture I can post one tomorrow.

    Rich

    Comment

    • Craig O.
      Very Frequent User
      • July 31, 1983
      • 207

      #3
      Re: 67 ps pulley nut

      Thanks Rich, I look forward to your photo.

      Comment

      • Rich P.
        Expired
        • January 12, 2009
        • 1361

        #4
        Re: 67 ps pulley nut

        Here's a few shots of originals.

        Rich
        Attached Files

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 43219

          #5
          Re: 67 ps pulley nut

          Originally posted by Rich Pasqualone (49858)
          Here's a few shots of originals.

          Rich

          Rich and Craig------


          GM #3824475 discontinued without supercession in July, 1991.
          In Appreciation of John Hinckley

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"