Help, the judging manual says there is a date on the bottom of the beast.It is the correct casting # it has the winters mark, the carb base is for a carter.I find a casting tag on the bottom with 5 sets of #'s seperated by dots that make no sense. Is it under the oil baffel? Just a wondering.
date code on L76 intake 1963/64
Collapse
X
-
Re: date code on L76 intake 1963/64
John, I have my 63 327/340 apart also and was noting the same thing you were running into. No date to be found and there are a batch of numbers but no dates. unless its under the baffle on the bottom as you say.
I did however see a manifold somewhere with a date, cannor remember where I saw it.maybe here on the TDB.New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.- Top
-
Re: date code on L76 intake 1963/64
You didn't ask but on a 63 to 65 FI car the date of the baseplate/intake is on the bottom.
Now I am in trouble.
There was a run of baseplates for FI's that had a royal screwup. Some of the 64-65 baseplates had two different dates on them. One of the top and on on the bottom.- Top
Comment
-
New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.- Top
Comment
-
Re: date code on L76 intake 1963/64
Help, the judging manual says there is a date on the bottom of the beast.It is the correct casting # it has the winters mark, the carb base is for a carter.I find a casting tag on the bottom with 5 sets of #'s seperated by dots that make no sense. Is it under the oil baffel? Just a wondering.
KEN65 350 TI CONV 67 J56 435 CONV,67,390/AIR CONV,70 454/air CONV,
What A MAN WON'T SPEND TO GIVE HIS ASS A RIDE- Top
Comment
-
Re: date code on L76 intake 1963/64
Thanks John, BUT by useing the words 'most likely' have we moved to a lighter shade of gray.The only reason i'm bird doging is I was called out on the intake being incorrect. This person useing the 63/64 judging GUIDE as proof. The way I understand the guide, is that the date is on the bottom but not judged , no placement of the code is given . Without ruining a good intake I just thought we could get to the Bottom (sorry Stu)- Top
Comment
-
Re: date code on L76 intake 1963/64
Thanks John, BUT by useing the words 'most likely' have we moved to a lighter shade of gray.The only reason i'm bird doging is I was called out on the intake being incorrect. This person useing the 63/64 judging GUIDE as proof. The way I understand the guide, is that the date is on the bottom but not judged , no placement of the code is given . Without ruining a good intake I just thought we could get to the Bottom (sorry Stu)
KEN65 350 TI CONV 67 J56 435 CONV,67,390/AIR CONV,70 454/air CONV,
What A MAN WON'T SPEND TO GIVE HIS ASS A RIDE- Top
Comment
-
Re: date code on L76 intake 1963/64
Thanks Ken, between yourself and John leaning to under the oil deflector, thats good enough for me. Ken the intake is just sitting on my shelf and the question was asked and all my old hot rodding buds had differing opinions. The worst part is I did not know it was dated.Now I know and we can shelve this.- Top
Comment
-
Re: date code on L76 intake 1963/64
The date code on that intake is under the oil baffle, you have to remove the 4 rivets, and the date is right there on a 64/65....the date is not judged, however the L76 intake is different between the 1963 and 1964/1965. the 63 L76 uses the 3794129 aluminum intake and the 64/65 L76 uses the 3844461, the 63 uses a carter 4bl, and the 64/65 uses a holley 4bl. Hope that helpsDino Lanno- Top
Comment
Comment