62 trunk division cardboard

[Mike M.]

anybody got a photo of an original with a close-up of the mfgr's logo stamped in one of the corners. the mfgr logo is FP. thanks,mike

[John F.]

Re: 62 trunk division cardboard

Mike, this is as close as I can get with my camera.

John

[John F.]

Re: 62 trunk division cardboard

Mike, My fingers got ahead of me. See pic.

John

[Mike M.]

Re: 62 trunk division cardboard

john: thanks much. photo not clear enough for me to determine if the FP within a circle is either stamped from the red side or embossed from the backside of the cardboard. i'd guess its stamped but not sure from photo. thans and regards,mike

[John F.]

Re: 62 trunk division cardboard

Mike, It is stamped from the red side.

John

[Jerry W.]

Re: 62 trunk division cardboard

Mike.....i am also interested in this....so i enlarged the pic....the FP seems to be raised on the red side from being embossed or stamped from the red side

[Mike M.]

Re: 62 trunk division cardboard

Mike.....i am also interested in this....so i enlarged the pic....the FP seems to be raised on the red side from being embossed or stamped from the red side

jerry: are you basing the embossed theory based on john;s photo? john: what's the diameter of the circle surrounding the FP? thanks guys,mike

[Jerry W.]

Re: 62 trunk division cardboard

Mike....Yep...based upon Tom's pic enlarged ....it looks like the impression left by an engraved signet ring...Maybe Tom can explain for certain by looking at the actual cardboard.....sorry for the confusion but i would also like to know for sure.

[Richard G.]

Re: 62 trunk division cardboard

What is the diameter of the circle? 61 would be the same? thanks

[John F.]

Re: 62 trunk division cardboard

It is a stamped circle from the outside and 1/4" in diameter. The outer circle appears to have a cut line where stamped.

John