63-67 Glove Box Frame to Dash Screws original vs repro

[Rich P.]

I just happen to be going through a pile of screws today and came across some original glove box frame to dash screws and wanted to show the differences between the originals and repros.

The original have a noticable wide flange as well as a round head where the repros have a smaller flange and a flat spot on the phillips cross.

Rich

[John F.]

Re: 63-67 Glove Box Frame to Dash Screws original vs repro

They are also very similar to the screws that hold down the two access panels in the trunk on my 62.

[Rich P.]

Re: 63-67 Glove Box Frame to Dash Screws original vs repro

They are also very similar to the screws that hold down the two access panels in the trunk on my 62.

John,

are those 1/4-20 thread. I know if a few screws on C1's that look like this but are 10-24 thread.

Rich

[Mike M.]

Re: 63-67 Glove Box Frame to Dash Screws original vs repro

They are also very similar to the screws that hold down the two access panels in the trunk on my 62.

they appear similar in the photo but aren't even close to interchanging. regards,mike