62 heater hoses - NCRS Discussion Boards

62 heater hoses

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John F.
    Extremely Frequent Poster
    • March 23, 2008
    • 2395

    62 heater hoses

    I understand that the hose from the water pump to heater is 3/4". The hose from the intake to heater is 5/8". Are they black ribbed with GM logo or ribbed and no logo?
  • Bruce B.
    Extremely Frequent Poster
    • May 31, 1996
    • 2930

    #2
    Re: 62 heater hoses

    John,
    My 61-62 Judging Manual 4th edition (1992) calls for ribbed hoses for both the heater inlet and outlet.

    Comment

    • John F.
      Extremely Frequent Poster
      • March 23, 2008
      • 2395

      #3
      Re: 62 heater hoses

      Do they have the GM logo on the hose or no logo?

      Comment

      • Bruce B.
        Extremely Frequent Poster
        • May 31, 1996
        • 2930

        #4
        Re: 62 heater hoses

        The old judging manual does not specify any logo on the heater hoses. The small ribs were there for identification .
        Radiator hoses did have "GM" and part number printed on them.

        Comment

        • Lou C.
          Very Frequent User
          • August 31, 1992
          • 134

          #5
          Re: 62 heater hoses

          No GM logo on 61-62 heater hoses.

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"