Oil Dipstick markings, 1965 396 - NCRS Discussion Boards

Oil Dipstick markings, 1965 396

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John S.
    Very Frequent User
    • September 30, 1997
    • 263

    #16
    Re: Oil Dipstick markings, 1965 396

    Did all 396 Corvette dipsticks had their lettering embossed?

    Comment

    • Wayne M.
      Expired
      • March 1, 1980
      • 6414

      #17
      Re: Oil Dipstick markings, 1965 396

      Originally posted by William Clupper (618)
      Not only that, but the picture addresses a question I had about the flattened vs round handle. The eBay piece seemed to have the flattened handle, ane easy to see no-no.

      Bill -- now here's a flattened tubing handle . Again, eBay, this time a more reasonable $37; part #3925520. My Jan'70 P&A30B says '65 thru '68 BB Corvette. Same A & B dimensions (skirt to full mark; skirt to add mark) as 3860316 and 3860318.

      Then there's the issue of the "dimple" in the handle, just above the skirt. Luck for these sellers, the part # tag hides any detail.
      Attached Files
      Last edited by Wayne M.; November 17, 2010, 12:19 PM.

      Comment

      • Michael H.
        Expired
        • January 29, 2008
        • 7477

        #18
        Re: Oil Dipstick markings, 1965 396

        Originally posted by John Sieczkos (29744)
        Did all 396 Corvette dipsticks had their lettering embossed?
        The "embossed" must have changed at some point. The characters in my Nov 1965 build 66 are stamped with no visible characters showing on the reverse side. (same 3860316 part number as 65)

        I noticed that the stamped "M" is different than the "M" seen on other sticks??? Mine looks more like a "W".
        Last edited by Michael H.; August 12, 2011, 12:17 AM.

        Comment

        • Bruce T.
          Frequent User
          • February 1, 1978
          • 60

          #19
          Re: Oil Dipstick markings, 1965 396

          Originally posted by Michael Hanson (4067)
          The "embossed" must have changed at some point. The characters in my Nov 1965 build 66 are stamped with no visible characters showing on the reverse side. (same 3960316 part number as 65)

          I noticed that the stamped "M" is different than the "M" seen on other sticks??? Mine looks more like a "W".
          My December 1965 dipstick on my 1966 396 El Camino is exactly like this one.

          Comment

          • Joe L.
            Beyond Control Poster
            • February 1, 1988
            • 43221

            #20
            Re: Oil Dipstick markings, 1965 396

            Originally posted by Wayne Midkiff (3437)
            Bill -- now here's a flattened tubing handle . Again, eBay, this time a more reasonable $37; part #3925520. My Jan'70 P&A30B says '65 thru '68 BB Corvette. Same A & B dimensions (skirt to full mark; skirt to add mark) as 3860316 and 3860318.

            Then there's the issue of the "dimple" in the handle, just above the skirt. Luck for these sellers, the part # tag hides any detail.
            Wayne-----


            The GM #3925520 dipstick was discontinued in October, 1971 so the example in the eBay item can't be any newer than that.
            In Appreciation of John Hinckley

            Comment

            • Jody B.
              Very Frequent User
              • March 1, 1991
              • 108

              #21
              Re: Oil Dipstick markings, 1965 396

              Here are a couple of pictures of my original 396/425 dipstick.
              Attached Files

              Comment

              • Ronald L.
                Extremely Frequent Poster
                • October 18, 2009
                • 3248

                #22
                Re: Oil Dipstick markings, 1965 396

                Hi Jody!

                My 4-66 is exactly as Michael's early 66.

                Comment

                Working...
                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"