67 Headlamp Wiring Harness Clips

[Kirk M.]

Looking at the assembly manual, I see two different types of clips used to attach the headlamp wiring harness

1. 2 (3799990) just above the parking plug assembly
2. 4 clips (3844390) across the upper underside of the front clip.

Can I get some pics of what these clips look like, so I can get the correct ones. Thanks.

Kirk

[William C.]

Re: 67 Headlamp Wiring Harness Clips

attached shows the '390 clips the harness runs thru.

[Kirk M.]

Re: 67 Headlamp Wiring Harness Clips

Thanks Bill, know if anyone makes those as repros?

Kirk

[Rich P.]

Re: 67 Headlamp Wiring Harness Clips

Kirk,

here's the clip riveted to the fender skirt "above the parking lamp" The clip gets riveted to the skirt. The 2 bolts are not used for this application.

Rich

[Rich P.]

Re: 67 Headlamp Wiring Harness Clips

Thanks Bill, know if anyone makes those as repros?

Kirk

LICS makes a repro. But they get dinged in judging. Unless you can find originals (very hard to find as the tabs break off usually in removal) you need to use the LICS piece.

Rich

[William C.]

Re: 67 Headlamp Wiring Harness Clips

I'd first try the part number from your local dealer, the scan is from a "standard parts catalog" I also think the standard reproduction parts houses should have them available.

[Kirk M.]

Re: 67 Headlamp Wiring Harness Clips

Kirk,

here's the clip riveted to the fender skirt "above the parking lamp" The clip gets riveted to the skirt. The 2 bolts are not used for this application.

Rich

I have a couple of those. I noticed on the inside of my front fender that there appears to be a black plastic disc that was used to mount this. My clip sure looks original to the car. Is this some kinda special rivet? Thanks.

Kirk