Are there any LEC/Cleveland area members available to lend a hand? - NCRS Discussion Boards

Are there any LEC/Cleveland area members available to lend a hand?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chuck M.
    Very Frequent User
    • January 31, 2002
    • 334

    Are there any LEC/Cleveland area members available to lend a hand?

    We are having trouble carb/timing issues on our 67 L-79. I was wondering if there are any Cleveland area members that might be willing to give us a hand with troubleshooting this issue. We have limited experience with Holley's and just had it rebuilt.

    We had the carb rebulit because it was leaking pretty badly. When we received it back the car fired right up and would high idle/idle properly with no issues. This was when there was still snow on the ground so we couldnt take it for a test drive. Once we were able to take it out we quickly found out that the car did not want to perform under load. Any time we would ask something from it (2000-2500 rpm) it would start bucking badly.

    Any help would be greatly appreciated and we would be happy to provide compensation for any time (and a few cold ones).

    Thanks,
    Chuck
  • Edward J.
    Extremely Frequent Poster
    • September 15, 2008
    • 6940

    #2
    Re: Are there any LEC/Cleveland area members available to lend a hand?

    Chuck, sorry im not anywhere near Cleveland, if the car runs fine under light throttle then I would suspect it a fuel related problem.

    Have you check the fuel pressure, sounds like you may be running out of fuel. check the fuel lines also for kinks at the pump and tank area.
    Last edited by Edward J.; October 4, 2010, 03:57 PM.
    New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.

    Comment

    • Terry M.
      Beyond Control Poster
      • September 30, 1980
      • 15569

      #3
      Re: Are there any LEC/Cleveland area members available to lend a hand?

      Check the fuel filter as well. A clogged filter will impede the flow of fuel to the point of the symptoms you describe.
      Terry

      Comment

      • Edward J.
        Extremely Frequent Poster
        • September 15, 2008
        • 6940

        #4
        Re: Are there any LEC/Cleveland area members available to lend a hand?

        Terry, I had the fuel filter on my mind when I wrote the post and forgot. my other have was rushing me, saying dinners on the table.
        New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.

        Comment

        • Chuck M.
          Very Frequent User
          • January 31, 2002
          • 334

          #5
          Re: Are there any LEC/Cleveland area members available to lend a hand?

          Thanks for the help guys! I'll take a look at the fuel filter and report back. All of the lines look good and there are no signs of any kinks.

          Comment

          • Tom F.
            Expired
            • September 30, 1995
            • 14

            #6
            Re: Are there any LEC/Cleveland area members available to lend a hand?

            Hi

            I am the news letter editor for the LEC. Are you still having issues? There are several members that may be able to help. Just in case your interested, we are having a technical/judging session on carbs on March 19, 2011 even using a running engine on a test stand for set up discussions. Interested? email me for details

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"