Aero Rivet Tool On Heater Box

[Mark F.]

Here are photos of my heater box overhaul. I used the Aero Rivet tool to set the steel rivets. It works well with exception that it's too large to get at all of the rivets. What I did to solve the problem was take a c-clamp and drilled a 1/4 inch hole in it. I then inserted one of the aero rivet faces and this enabled me to set the final rivets.

Mark

[Alan S.]

Re: Aero Rivet Tool On Heater Box

Hi Mark,
Thanks for the report and pictures. NICE solution.
Regards,
Alan

[Scott S.]

Re: Aero Rivet Tool On Heater Box

Here are photos of my heater box overhaul. I used the Aero Rivet tool to set the steel rivets. It works well with exception that it's too large to get at all of the rivets. What I did to solve the problem was take a c-clamp and drilled a 1/4 inch hole in it. I then inserted one of the aero rivet faces and this enabled me to set the final rivets.

Mark

Thanks for the pictures Mark, looks like it worked out great.