62 Ignition switch wiring - NCRS Discussion Boards

62 Ignition switch wiring

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John F.
    Extremely Frequent Poster
    • March 23, 2008
    • 2408

    62 Ignition switch wiring

    See photos. There are two empty terminals on the back of the switch. There are two pink and one gray wire hanging loose in the area. Do any of these hook up to the switch? Also last night on the way to the local DQ the dash light to the gas/temp gauge went out and both gauges are pegged to the left. fuses look good. What should I look for?
    John F
    Attached Files
    Last edited by John F.; August 22, 2010, 10:18 AM. Reason: corrected red to pink
  • Roger O.
    Expired
    • September 7, 2009
    • 209

    #2
    Re: 62 Ignition switch wiring

    The fuel/temp gauges are powered off the back of the ign switch by a 14 pink , which appears to be the pink hanging.

    Comment

    • John F.
      Extremely Frequent Poster
      • March 23, 2008
      • 2408

      #3
      Re: 62 Ignition switch wiring

      Roger, in looking at the pictures is it the terminal to the right or left?
      John F

      Comment

      • Donald L.
        Very Frequent User
        • September 30, 1998
        • 461

        #4
        Re: 62 Ignition switch wiring

        On my 62 the larger pink wire goes to the ACC pole of the switch and the smaller pink wire to the ignition pole. Could not find the gray wire connector in that area.

        Comment

        • John F.
          Extremely Frequent Poster
          • March 23, 2008
          • 2408

          #5
          Re: 62 Ignition switch wiring

          Thank you all. Got the gauges working again.
          John F

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"